Introduction:
Spark plugs are vital components in the ignition system of an internal combustion engine. Over time, spark plugs can become worn out or develop deposits, which can result in poor engine performance and reduced fuel efficiency. Changing the spark plugs in your Perodua Myvi is a simple and essential maintenance task that helps ensure optimal engine performance. In this blog will guide you through the step-by-step process of changing the spark plugs in your Myvi, allowing you to keep your engine running smoothly and efficiently.
Tools and Materials Needed:
- New spark plugs (compatible with your Perodua Myvi)
- Socket wrench
- Spark plug socket (specifically designed for spark plug removal)
- Extension bar
- Spark plug gap gauge (to check and adjust the gap, if required)
- Torque wrench (recommended for proper tightening)
A few tips before you start:
- Make sure to complete each step accurately before moving on to the next
- Take your time and proceed with caution
- Have fun and enjoy the experience!
Gather the Necessary Information
First thing’s first, consult your vehicle’s owner’s manual or an online resource to identify the correct type and gap setting for your spark plugs OR you can contact us via WhatsApp. This information is essential to ensure you purchase the appropriate replacements.
Let’s get started！
Step 1: Preparation
Make sure that your engine is cool before proceeding; you wouldn’t want to burn yourself during the process. Park your car on a flat surface, engage the parking brake, and open the hood. Locate the spark plug wires or ignition coil packs, which are typically connected to the top of the engine cylinder head.
Step 2: Removing the Old Spark Plugs
- Carefully disconnect the spark plug wires or ignition coil packs from the spark plugs. If you have ignition coil packs, they may be secured with bolts or clips that need to be removed.
- Use the socket wrench with the spark plug socket (of the appropriate size) and attach it to the extension bar if needed.
- Gently loosen and remove one spark plug at a time by turning it counterclockwise. Be cautious not to apply excessive force or damage the threads.
Step 3: Inspecting and Preparing the New Spark Plugs
- Examine the old spark plugs for signs of wear, such as eroded electrodes or excessive carbon buildup. If necessary, consult your vehicle’s manual for specific troubleshooting advice.
- Check the gap of the new spark plugs using a spark plug gap gauge. Adjust the gap if required according to your vehicle’s specifications.
Step 4: Installing the New Spark Plugs
- Insert the new spark plug into the spark plug socket and carefully lower it into the spark plug hole.
- Slowly tighten the spark plug by hand until it is snug. Then, use the torque wrench to tighten it to the manufacturer’s recommended torque specification. Avoid over-tightening.
Step 5: Reassembling and Testing
- Reconnect the spark plug wires or ignition coil packs to the new spark plugs, ensuring they are properly seated and secured.
- Repeat Steps 2-5 for each remaining spark plug.
- Double-check all connections and ensure everything is properly tightened.
- Close the hood and start your Perodua Myvi to test the new spark plugs. Listen for smooth engine operation and pay attention to any abnormal noises or vibrations.
Conclusion:
Congratulations! You have successfully changed the spark plugs in your Perodua Myvi. By performing this simple maintenance task, you contribute to the overall health and performance of your vehicle’s engine. Remember to consult your vehicle’s manual for specific instructions and recommended maintenance intervals. Also do check out our video where we do a tutorial on how to change spark plugs in a Perodua Myvi!!
